Yosemite Usb Installer

Posted : admin | On 05-10-2021

Bootable USB Installers for OS X Mavericks, Yosemite, El Capitan, and Sierra

The traditional method of creating a bootable OS X USB installer no longer works, so you’ll need to follow a new approach when dealing with OS X Yosemite. While there are multiple methods that will work, here’s the easiest way to create a bootable OS X 10.10 Yosemite USB Installer for the Yosemite Public Beta. How to create a bootable OS X Yosemite drive! You can perform clean installations easily and install this version of OS X on other Macs!Sudo Command:sudo /Ap.

Verify the Installation Files are present. Head over to your Applications folder and check that there is a file which says Install Yosemite. Prepare a USB Flash Drive (Must be 8Gb or larger) Plug the USB Drive in to your Mac and open “Disk Utility” (found under applications / utilities in finder) Select the USB Drive; Select the Erase tab.


First, review this introductory article: Create a bootable installer for macOS. Second, see this How To outline for creating a bootable El Capitan installer. Simply replace the Terminal command with the one from the preceding article by copying it into the Terminal window. You will need an 8GB or larger USB flash drive that has been partitioned and formatted for use with OS X.


Drive Partition and Format

  1. Open Disk Utility in the Utilities' folder.
  2. After Disk Utility loads select the drive (out-dented entry with the mfg.'s ID and size) from the side list.
  3. Click on the Erase tab in the Disk Utility toolbar. Name the drive, 'MyVolume'. <---- IMPORTANT!
  4. In the drop down panel set the partition scheme to GUID. Set the Format type to Mac OS Extended (Journaled.)
  5. Click on the Apply button and wait for the Done button to activate. When it does click on it.
  6. Quit Disk Utility.


Create Installer

Open the Terminal in the Utilities' folder. Choose the appropriate command line (in red) depending upon what OS X installer you want. Paste that entire command line from below at the Terminal's prompt:


Command for macOS High Sierra:

sudo /Applications/Install macOS High Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS High Sierra.app

Command for macOS Sierra:

sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS Sierra.app

Command for El Capitan:

sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X El Capitan.app

Command for Yosemite:

sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Yosemite.app

Command for Mavericks:

sudo /Applications/Install OS X Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Mavericks.app


Press RETURN. You will be asked for your admin password. It will not echo to the Terminal window. Then press RETURN again. Wait for the return of the Terminal prompt signifying the process has completed. It takes quite some time to finish. Be patient.

Sep 13, 2018 1:16 PM

In this article, I will show you How to Create a Bootable USB for macOS Mojave on Windows PC. Therefore, you have to know the complete information and guide of installation on VMware Workstation and VirtualBox. Furthermore, you also know and have information about the Mac operating system, that Mac or Apple company is releasing day by day new updates and features for there users, one of the good news is here that you can easily test or install the macOS Mojave beta on VirtualBox and VMware, However, if you want to test that I have provided or created the article, for you in below I will give you the link you can see there.

Create a Bootable USB for macOS Mojave on Windows

To create a bootable macOS Mojave USB installer on Windows, you need some requirements to ready that on your computer. Download macOS Mojave the latest version and Extract the compressed macOS Mojave with WinRaR. After that, you are done with extracting now download TransMac and install that on your PC, then get ready for the preparation of creating macOS Mojave bootable USB on Windows operating system.

Create a Bootable USB for macOS Mojave on Windows

TransMac is Acute system in Windows operating system that can copy and paste and manage the files on Windows for Apple or Mac Systems, Including Mac-formatted USB drives, SSD drive, Hard drives, and any kind of storage devices, further, it can burn VMDK and dmg files of macOS Mojave, macOS High Sierra, macOS X El Capitan, macOS Sierra, macOS Yosemite, and any other operating system of macOS, there is bad news that TransMac is not free whether you should too by this or use for 15 days Trail.

How To Create A Bootable Installer For Mac Os Yosemite System Requirements

Required files:

Installer

Related Articles:

Yosemite Usb Installer

Install TransMac on Windows PC

If you are in the process to install macOS Sierra 10.12 on your PC or Hackintosh, the first step is to create a bootable USB installer for macOS Sierra to install Mac OS from it on your PC, you can create bootable USB Installer with UniBeast, but still, you need a Macintosh to download and create macOS Sierra bootable USB Installer.

Usb

While you are downloaded the complete file of TransMac and macOS Mojave on a computer. Now in here, you need the simple process and ways of installation that everyone can install that easily on there Windows PC.

  • Run the TransMac setup by double-clicking on setup.
  • On the welcome screen click Next.
  • Read carefully the agreement on the license and agreement and click Next.
  • Select the location for Transmac where you want to install it.
  • On the next TransMac will ask from you to create a shortcuts icon on the start menu and screen.
  • The next screen doesn’t do anything click Next.
  • Therefore, you are ready to install TransMac on your computer, for just click on the Install button and wait for some minutes to complete the installation.
  • After that, that installation is completed click Finish.

Now start Creating a Bootable USB for macOS Mojave on Windows

After that, you are successfully installed TransMac and downloaded macOS Mojave dmg file now you need to create USB bootable for macOS Mojave, Therefore, you need to get at least 16 up to 32 GB flash drive and attach the USB drive to the computer and follow the steps which I am going to show you in this article.

Step #1. Now you are completely ready to create bootable USB for macOS Mojave. At the very beginning step you need to open TransMac, therefore Right-click on TransMac and select Run As Administrator.

Run As Administrator

Step #2. After that, TransMac is opened you will see the list of drives then select the drive which you are going to make bootable for macOS Mojave, and Right-click on that then select Restore with Disk Image.

Step #3. After that, you have selected Restore with Disk Image, therefor you will face pop up warning from containing mounted volumes. However, to continue the process simply click on yes to go on a further step.

Warning of selected Volume for macOS Mojave

Step #5. In this step, you need to browse for macOS Mojave dmg file, just click on three dots and select a macOS Mojave dmg file.

Browse macOS Mojave dmg file

Step #6. In this step, you will face another warning pop up. So, it is simple to click on Yes and moves to the next step.

Step #7. In this step, you should wait for some minutes to format your drive and wait, it will automatically copy the macOS Mojave dmg file to the USB drive.

Formatting Drive for macOS Mojave

Conclusion

That’s all about How to Create a Bootable USB for macOS Mojave on Windows PC. However, you can create bootable USB for macOS Mojave using TransMac and TransMac is a very light software for Windows PC. Furthermore, if you faced any kind of problem in this article you can comment in below comment box, and don’t forget to subscribe to our website for the latest posts.

These advanced steps are primarily for system administrators and others who are familiar with the command line. You don't need a bootable installer to upgrade macOS or reinstall macOS, but it can be useful when you want to install on multiple computers without downloading the installer each time.

Download macOS

Find the appropriate download link in the upgrade instructions for each macOS version:

macOS Catalina, macOS Mojave, ormacOS High Sierra
Installers for each of these macOS versions download directly to your Applications folder as an app named Install macOS Catalina, Install macOS Mojave, or Install macOS High Sierra. If the installer opens after downloading, quit it without continuing installation. Important: To get the correct installer, download from a Mac that is using macOS Sierra 10.12.5 or later, or El Capitan 10.11.6. Enterprise administrators, please download from Apple, not a locally hosted software-update server.

OS X El Capitan
El Capitan downloads as a disk image. On a Mac that is compatible with El Capitan, open the disk image and run the installer within, named InstallMacOSX.pkg. It installs an app named Install OS X El Capitan into your Applications folder. You will create the bootable installer from this app, not from the disk image or .pkg installer.

Use the 'createinstallmedia' command in Terminal

  1. Connect the USB flash drive or other volume that you're using for the bootable installer. Make sure that it has at least 12GB of available storage and is formatted as Mac OS Extended.
  2. Open Terminal, which is in the Utilities folder of your Applications folder.
  3. Type or paste one of the following commands in Terminal. These assume that the installer is still in your Applications folder, and MyVolume is the name of the USB flash drive or other volume you're using. If it has a different name, replace MyVolume in these commands with the name of your volume.
    Catalina:*
    Mojave:*

    High Sierra:*
    El Capitan:
  4. Press Return after typing the command.
  5. When prompted, type your administrator password and press Return again. Terminal doesn't show any characters as you type your password.
  6. When prompted, type Y to confirm that you want to erase the volume, then press Return. Terminal shows the progress as the bootable installer is created.
  7. When Terminal says that it's done, the volume will have the same name as the installer you downloaded, such as Install macOS Catalina. You can now quit Terminal and eject the volume.

* If your Mac is using macOS Sierra or earlier, include the --applicationpath argument, similar to the way this argument is used in the command for El Capitan.

Use the bootable installer

After creating the bootable installer, follow these steps to use it:

Create A Bootable Installer For Mac Os Yosemite

  1. Plug the bootable installer into a compatible Mac.
  2. Use Startup Manager or Startup Disk preferences to select the bootable installer as the startup disk, then start up from it. Your Mac will start up to macOS Recovery.
    Learn about selecting a startup disk, including what to do if your Mac doesn't start up from it.
  3. Choose your language, if prompted.
  4. A bootable installer doesn't download macOS from the Internet, but it does require the Internet to get information specific to your Mac model, such as firmware updates. If you need to connect to a Wi-Fi network, use the Wi-Fi menu in the menu bar.
  5. Select Install macOS (or Install OS X) from the Utilities window, then click Continue and follow the onscreen instructions.

Learn more

For more information about the createinstallmedia command and the arguments that you can use with it, make sure that the macOS installer is in your Applications folder, then enter this path in Terminal:

How To Create A Bootable Mac Os Yosemite Installer Drive

Catalina:

Mojave:

How To Create A Bootable Installer For Mac Os Yosemite Patcher

High Sierra:

Yosemite Os Installer

How To Create A Bootable Installer For Os X Yosemite

Create Bootable Usb Yosemite Installer

El Capitan: